Hi,

you need to add the search path to the edif in ISE so that it can find the netlist.

Andi

Hi,

I'm trying to add an IP(FFT), generated by Coregen, to an EDK project.

I have created a new custom IP in EDK and added the vhdl code of FFT into
user_logic.vhd file, and imported it to the EDK project, but I got three
errors:

ERROR:NgdBuild:604 - logical block 'fft_ip_0/fft_ip_0/USER_LOGIC_I/fft/U3'
with
   type 'fft128' could not be resolved. A pin name misspelling can cause
this, a missing edif or ngc file, or the misspelling of a type name.
Symbol 'fft128' is not supported in target 'virtex2p'.
ERROR:NgdBuild:455 - logical net 'plb_bram_if_cntlr_1_port_BRAM_Clk' has
   multiple driver(s):
     pin PAD on block
plb_bram_if_cntlr_1_bram/plb_bram_if_cntlr_1_bram/plb_bram_if_cntlr_1_port_BRAM_Clk
with type PAD,
     pin O on block dcm_0/dcm_0/CLK0_BUFG_INST with type BUFG
ERROR:NgdBuild:924 - input pad net 'plb_bram_if_cntlr_1_port_BRAM_Clk' is
   driving non-buffer primitives:
     pin C on block reset_block/reset_block/core_cnt_en with type FD,
     pin C on block reset_block/reset_block/Bus_Struct_Reset_0 with type
FD,
     pin C on block reset_block/reset_block/Rstc405resetchip with type
FD,
     pin C on block reset_block/reset_block/Peripheral_Reset_0 with type
FD,
     pin C on block reset_block/reset_block/Rstc405resetsys with type FD,
     pin C on block reset_block/reset_block/Core_Reset_Req_d3 with type
FD,
     pin C on block reset_block/reset_block/CORE_RESET/q_int_0 with type
FDRE,
     pin C on block reset_block/reset_block/CORE_RESET/q_int_1 with type
FDRE,
     pin C on block reset_block/reset_block/CORE_RESET/q_int_2 with type
FDRE,
     pin C on block reset_block/reset_block/CORE_RESET/q_int_3 with type
FDRE,
     pin C on block reset_block/reset_block/Core_Reset_Req_d2 with type
FD,
     pin C on block reset_block/reset_block/EXT_LPF/lpf_exr with type
FDSE,
     pin C on block reset_block/reset_block/EXT_LPF/lpf_asr with type
FDSE,
     pin 
C on block reset_block/reset_block/EXT_LPF/asr_lpf_1 with type FD,
     pin C on block reset_block/reset_block/EXT_LPF/exr_lpf_1 with type
FD,
     pin C on block reset_block/reset_block/EXT_LPF/asr_lpf_2 with type
FD,
     pin C on block reset_block/reset_block/EXT_LPF/exr_lpf_2 with type
FD,
     pin C on block reset_block/reset_block/EXT_LPF/asr_lpf_3 with type
FD,
     pin C on block reset_block/reset_block/EXT_LPF/exr_lpf_3 with type
FD,
     pin C on block reset_block/reset_block/EXT_LPF/exr_lpf_0 with type
FD

NGDBUILD Design Results Summary:
  Number of errors:     3
  Number of warnings:  77

I don't know what exactly these errors mean. Can anyone help to resolve
these problems?