Reply by Wojciech Zabolotny●June 23, 20062006-06-23
I have found the following site:
http://gentoo-wiki.com/HOWTO_Xilinx
which also discusses the 2.6.16 issues:
http://gentoo-wiki.com/Talk:HOWTO_Xilinx
However after downloading and unpacking the
http://www.jungo.com/download/WD702LN.tgz
I've modified the CFLAGS in redist/makefile in slightly simpler way - just
changing/adding two definitions in CFLAGS:
-DKBUILD_MODNAME=\"windrvr6\" -DKBUILD_BASENAME=\"windrvr6\"
So the problem with the original version was:
1. old version of windrvr6 source which caused udev problems
2. wrong definition of KBUILD_MODNAME
3. lack of KBUILD_BASENAME definition
--
HTH & Regards,
Wojtek
Reply by Wojciech Zabolotny●June 23, 20062006-06-23
Has anybody managed to compile the Xilinx cable drivers for Linux kernel
2.6 available here:
http://www.xilinx.com/xlnx/xil_ans_display.jsp?getPagePath=22648ftp://ftp.xilinx.com/pub/utilities/M1_workstation/linuxdrivers.2.6.tar.gz
with kernel 2.6.16?
The problem is with windrvr6 driver.
After ./configure and ./make I get a bunch of errors:
/lib/modules/2.6.16.18/build/include/asm/rwsem.h: In function
'__down_read':
/lib/modules/2.6.16.18/build/include/asm/rwsem.h:105: error: syntax error
before 'KBUILD_BASENAME'
/lib/modules/2.6.16.18/build/include/asm/rwsem.h: In function
'__down_write':
/lib/modules/2.6.16.18/build/include/asm/rwsem.h:157: error: syntax error
before 'KBUILD_BASENAME'
/lib/modules/2.6.16.18/build/include/asm/rwsem.h: In function '__up_read':
/lib/modules/2.6.16.18/build/include/asm/rwsem.h:194: error: syntax error
before 'KBUILD_BASENAME'
--
TIA & Regards,
Wojtek Zabolotny