Hello Joel,

the Cyclone II-unit would be nice for me - I assume.
Is it programable with the WEB-Version of Quartus?
(This is a pivate project at the moment)

The Stratix II DSP kits are readily available.  These both contain 2x
12-bit, 125MHz A/D and 2x 14-bit 165MHz D/A.  The ordering codes for
these are:

DK-DSP-2S60N
Featuring the Stratix II 2S60 part with ~60KLEs, >2.5Mb RAM, 36 DSP
Blocks.

DK-DSP-2S180N
Featuring the Stratix II 2S60 part with ~180KLEs, >9.3Mb RAM, 96 DSP
Blocks.

Additionally the Cyclone II version with a 2C70 device on it will be
shipping shortly (boards are done - just finalizing documentation).
The ordering code for this is:
DK-DSP-2C70N

Regards

-Joel-

homoalteraiensis wrote:
> Is there anybody out having experiences with an evaluation board,
> containing an Altera FPGA like Cyclone or Stratix and doing Video
> processing with it?
>
> Can anybody recoomend a certain board with a good analog behaviour
> (high dynamic ADC) - possibly with a (hard) DSP?
> 
> Thanks in advance.

(this was my post, I just changed user name)

No Idea? It does not necessarily need to be a video app - just high
data rete with RAM and DSP port.

Is there anybody out having experiences with an evaluation board,
containing an Altera FPGA like Cyclone or Stratix and doing Video
processing with it?

Can anybody recoomend a certain board with a good analog behaviour
(high dynamic ADC) - possibly with a (hard) DSP?

Thanks in advance.