Hello all,
I am quite confused about the Ethernet MAC wrapper IP core. In the
documentation is written (if I understand correctly) that I have to
provide clk_gtx_clk, clk_phy_tx_clk0, clk_phy_rx_clk0, all are 125 MHz
clocks when I am using only EMAC0 and 1Gbps operation. But inside the
vhdl files I found hostclk and refclk and information that hostclk must
always be connected and refclk (200 MHz).
So the question is what clocks I really have to connect when I would
like to operate at 1 Gbps and only EMAC0 and do I have to introduce some
DCM to make that IP running on Xilinx ML403 board?
Regards,
Bartek