Thanks. I overlooked that part. This is extremely frustrating because
the installer said everything installed OK.
kjhales
GaLaKtIkUs=99 wrote:
> MIG runs only on windows, on MIG's page they say that in future
> versions Linux will be supported.
> I also faced this problem. I use VMWARE only for this!!!!
>
> Cheers
> Mehdi
>
> kjhales@catalpatechnology.com wrote:
> > I cannot get the MIG to work in Core Generator. I've written Xilinx,
> > but hope I can get a faster answer here.
> >
> > I used the Tools->Updates Installer in coregen to install MIG.
> > Help->About now says I have IP updates 1 and MIG 1.6 installed. It also
> > says I have MIG 1.5 installed.
> >
> > Xilinx says to list available cores by function, select
> > Memories&Storage Elements, then select MIG. However MIG simply does not
> > appear as an option. Does anyone have any idea why the insallation
> > (apparantly) failed? I am running under Fedora 4, and using ISE 8.1 sp
> > 3.
> >=20
> > Thanks
> > kjhales
Reply by ●September 22, 20062006-09-22
MIG runs only on windows, on MIG's page they say that in future
versions Linux will be supported.
I also faced this problem. I use VMWARE only for this!!!!
Cheers
Mehdi
kjhales@catalpatechnology.com wrote:
> I cannot get the MIG to work in Core Generator. I've written Xilinx,
> but hope I can get a faster answer here.
>
> I used the Tools->Updates Installer in coregen to install MIG.
> Help->About now says I have IP updates 1 and MIG 1.6 installed. It also
> says I have MIG 1.5 installed.
>
> Xilinx says to list available cores by function, select
> Memories&Storage Elements, then select MIG. However MIG simply does not
> appear as an option. Does anyone have any idea why the insallation
> (apparantly) failed? I am running under Fedora 4, and using ISE 8.1 sp
> 3.
>
> Thanks
> kjhales
Reply by ●September 21, 20062006-09-21
I cannot get the MIG to work in Core Generator. I've written Xilinx,
but hope I can get a faster answer here.
I used the Tools->Updates Installer in coregen to install MIG.
Help->About now says I have IP updates 1 and MIG 1.6 installed. It also
says I have MIG 1.5 installed.
Xilinx says to list available cores by function, select
Memories&Storage Elements, then select MIG. However MIG simply does not
appear as an option. Does anyone have any idea why the insallation
(apparantly) failed? I am running under Fedora 4, and using ISE 8.1 sp
3.
Thanks
kjhales