:)
Antti wrote:
> avionion@gmail.com schrieb:
>
> > Thanks Antti it works!
> > but i still wonder what the lattice people are doing. no response in
> > more than a month time.
> > Antti wrote:
> > > avionion@gmail.com schrieb:
> 
> maybe their webmaster is learning at Xilinx?
> 
> Antti

avionion@gmail.com schrieb:

> Thanks Antti it works!
> but i still wonder what the lattice people are doing. no response in
> more than a month time.
> Antti wrote:
> > avionion@gmail.com schrieb:

maybe their webmaster is learning at Xilinx?

Antti

Thanks Antti it works!
but i still wonder what the lattice people are doing. no response in
more than a month time.
Antti wrote:
> avionion@gmail.com schrieb:
>
> > As mentioned  by Antti, its not issue of uncompressing tar.gz or zip
> > files, i am unable to get anything downloaded. just read the mesage
> > that i get whenever i click on any link. i even wrote to webmaster, but
> > its about a month ,and with 2 reminds, still no response from
> > webmaster.
> > Jon Beniston wrote:
> > > avionion@gmail.com wrote:
> > > > Hi Antti
> > > > i am unable to get any download from lattice website and get the
> > > > following message:
> > > > "The file you have attempted to retrieve is not available at this time.
> > > >
> > > > We apologize for the inconvenience.
> > > >
> > > > If you continue to experience this difficulty, please contact the
> > > > Webmaster"
> > > > i have an account with lattice website as well. i am unable to download
> > > > any zip or exe file but  pdf files open correctly. anyone else facing
> > > > this problem? any solution to it?
> > >
> > > The file you download is a tar.bz2, not zip or exe. You need to extract
> > > it with:
> > >
> > > tar xjf src.tar.bz2
> > >
> > > Cheers,
> > > Jon
> try here,
>
> http://www.microfpga.com/files/Mico32DevTool_Installer_6_0_1_15.exe
>
> 200MB, full set of the LM32 distro
> (except datasheets and GCC sources)
> 
> Antti

avionion@gmail.com schrieb:

> As mentioned  by Antti, its not issue of uncompressing tar.gz or zip
> files, i am unable to get anything downloaded. just read the mesage
> that i get whenever i click on any link. i even wrote to webmaster, but
> its about a month ,and with 2 reminds, still no response from
> webmaster.
> Jon Beniston wrote:
> > avionion@gmail.com wrote:
> > > Hi Antti
> > > i am unable to get any download from lattice website and get the
> > > following message:
> > > "The file you have attempted to retrieve is not available at this time.
> > >
> > > We apologize for the inconvenience.
> > >
> > > If you continue to experience this difficulty, please contact the
> > > Webmaster"
> > > i have an account with lattice website as well. i am unable to download
> > > any zip or exe file but  pdf files open correctly. anyone else facing
> > > this problem? any solution to it?
> >
> > The file you download is a tar.bz2, not zip or exe. You need to extract
> > it with:
> >
> > tar xjf src.tar.bz2
> >
> > Cheers,
> > Jon
try here,

http://www.microfpga.com/files/Mico32DevTool_Installer_6_0_1_15.exe

200MB, full set of the LM32 distro
(except datasheets and GCC sources)

Antti

As mentioned  by Antti, its not issue of uncompressing tar.gz or zip
files, i am unable to get anything downloaded. just read the mesage
that i get whenever i click on any link. i even wrote to webmaster, but
its about a month ,and with 2 reminds, still no response from
webmaster.
Jon Beniston wrote:
> avionion@gmail.com wrote:
> > Hi Antti
> > i am unable to get any download from lattice website and get the
> > following message:
> > "The file you have attempted to retrieve is not available at this time.
> >
> > We apologize for the inconvenience.
> >
> > If you continue to experience this difficulty, please contact the
> > Webmaster"
> > i have an account with lattice website as well. i am unable to download
> > any zip or exe file but  pdf files open correctly. anyone else facing
> > this problem? any solution to it?
>
> The file you download is a tar.bz2, not zip or exe. You need to extract
> it with:
> 
> tar xjf src.tar.bz2
> 
> Cheers,
> Jon

Jon Beniston schrieb:

> avionion@gmail.com wrote:
> > Hi Antti
> > i am unable to get any download from lattice website and get the
> > following message:
> > "The file you have attempted to retrieve is not available at this time.
> >
> > We apologize for the inconvenience.
> >
> > If you continue to experience this difficulty, please contact the
> > Webmaster"
> > i have an account with lattice website as well. i am unable to download
> > any zip or exe file but  pdf files open correctly. anyone else facing
> > this problem? any solution to it?
>
> The file you download is a tar.bz2, not zip or exe. You need to extract
> it with:
>
> tar xjf src.tar.bz2
>
> Cheers,
> Jon

Jon,

I think the Lattice web has at least sporadic issues with the download
there are several people complaining about the downloads not starting,
so I dont it the issue of not being able to uncompress .bz2

Antti

avionion@gmail.com wrote:
> Hi Antti
> i am unable to get any download from lattice website and get the
> following message:
> "The file you have attempted to retrieve is not available at this time.
>
> We apologize for the inconvenience.
>
> If you continue to experience this difficulty, please contact the
> Webmaster"
> i have an account with lattice website as well. i am unable to download
> any zip or exe file but  pdf files open correctly. anyone else facing
> this problem? any solution to it?

The file you download is a tar.bz2, not zip or exe. You need to extract
it with:

tar xjf src.tar.bz2

Cheers,
Jon

Hi Antti
i am unable to get any download from lattice website and get the
following message:
"The file you have attempted to retrieve is not available at this time.

We apologize for the inconvenience.

If you continue to experience this difficulty, please contact the
Webmaster"
i have an account with lattice website as well. i am unable to download
any zip or exe file but  pdf files open correctly. anyone else facing
this problem? any solution to it?

Antti wrote:
> Thomas Entner schrieb:
>
> > Hi Antti,
> >
> > have you any idea why it is that slow? Branch penalty? Or is the write that
> > slow? Does the performance improve with caches on? (I have not looked
> > closely at Mico32 yet, maybe it is intended to only be used with caches?)
> >
> > Regarding the GPL: I think it is sufficient if they clearly say that the
> > softare is GPL-licensed and if they provide you the source-code on request.
> > So they would be only violating the license if you ask them to provide you
> > the source-code and they say "No". Once you have the source-code, you are
> > free to publish it yourself on a web side (I am sure, you will ;-)
> >
> > Thomas
> >
> > www.entner-electronics.com
> >
> http://www.latticesemi.com/dynamic/index.cfm?fuseaction=view_documents&sloc=01-01-08-11-48
> 
> LatticeMico32 GPL sources no need to ask, just get it.
> 
> Antti

Thomas Entner schrieb:

> Hi Antti,
>
> have you any idea why it is that slow? Branch penalty? Or is the write that
> slow? Does the performance improve with caches on? (I have not looked
> closely at Mico32 yet, maybe it is intended to only be used with caches?)
>
> Regarding the GPL: I think it is sufficient if they clearly say that the
> softare is GPL-licensed and if they provide you the source-code on request.
> So they would be only violating the license if you ask them to provide you
> the source-code and they say "No". Once you have the source-code, you are
> free to publish it yourself on a web side (I am sure, you will ;-)
>
> Thomas
>
> www.entner-electronics.com
>
http://www.latticesemi.com/dynamic/index.cfm?fuseaction=view_documents&sloc=01-01-08-11-48

LatticeMico32 GPL sources no need to ask, just get it.

Antti

Jon Beniston schrieb:

> Hal Murray wrote:
> > >on LM32 all memories are on Wishbone bus making the access to BRAM
> > >based memory block slower than the access to external memory (assuming
> > >cache hit).
> >
> > Can you cheat and build a system with cache and no memory, then
> > preload the cache with the data you want?
>
> As far as I can see, I don't think this is supported via the GUI yet,
> but would of course be possible if you hacked the RTL to change the
> cache memories and tags to be initialised with the correct data, which
> should be fairly straightforward to do.
>
> However, this would not be as efficient as using the instruction ROM
> and data RAM that are in the RTL, as you end up wasting resources on
> memories for the cache tag RAMs which aren't needed, and all of the
> cache refill logic etc..
>
> Cheers,
> Jon

hm, I guess the LM32_RAM that is included when JTAG debugger is enabled
is direct processor connected block RAM. as I had JTAG configured off
this module was also out, so I only had wishbone block RAMs left in the
system. For the custom instruction support there is anyway an update
needed so I guess the access to direct CPU connected on chip memories
will also be available then.

Antti

PS for those who want to play with LatticeMico32 on Xilinx platform I
uploaded the ISE project navigator project that I used for testing, its
rather minimal LM32 system tested to work in Virtex-4, available
@ www.microfpga.com , download area...