early Christmas (Pico) present

http://www.microfpga.com/joomla/index.php?option=com_remository&Itemid=27&func=fileinfo&id=4

Xilinx PicoBlaze based MicroFpga's supporting
all Xilinx FPGA's with less than 256 I/O from
XC2S15 to XC4VLX25 - a total of 112 devices.

Spartan3a are not included as they are not fully supported by ISE 8.2 :(
My wish that Xilinx would have released full S3A and V5LX(T) support
this year did not come true - DATA2MEM doesn not support them yet :(
possible only happens with ISE 9.1 release.

.. if some one asks what can I do with KCPSM inside an Virtex4 !?

Then one of the answers is simple - you can make the christmas lights
within minutes - no synthesis, no need to look what pin is clock connected
too, just set pad names in PicoBlaze assembler source , run kcpsm
assembler + data2mem and configure the FPGA with download.bit - done.
Your Christmas LED's blink and wink.

with merry christmas wishes
Antti
with a smily for a change
http://www.antti-brain.com