Reply by Vasanth Asokan●February 13, 20072007-02-13
You can use the functions provided by the Standalone BSP for this purpose.
Refer to the PPC exception handling section of the Standalone BSP docs.
- Vasanth
"Ed" <RobotBuilder@charter.net> wrote in message
news:1171072586.253725.95260@l53g2000cwa.googlegroups.com...
> Hi,
>
> I looked through the Xilkernel documentation and Xilinx mentions a few
> times about enabling and disabling interrupts and context switching.
> I need to be able to do this but can't seem to find anywhere how to do
> this. Anyone know how? I don't want to just enable and disable a
> single interrupt. I want to disable other threads from executing for
> a very short duration and turn off all interrupts. I am using a Power
> PC on the Virtex 4 FX12 MM.
>
> Thanks,
> -Ed
>
Reply by Ed●February 9, 20072007-02-09
Hi,
I looked through the Xilkernel documentation and Xilinx mentions a few
times about enabling and disabling interrupts and context switching.
I need to be able to do this but can't seem to find anywhere how to do
this. Anyone know how? I don't want to just enable and disable a
single interrupt. I want to disable other threads from executing for
a very short duration and turn off all interrupts. I am using a Power
PC on the Virtex 4 FX12 MM.
Thanks,
-Ed