I am guessing that this is because the IT dept. at your school limits what
the students can do on lab systems. If this is a lab system, you may have
to talk to your IT dept and have them (as administrators) make this change.
<kaosnannaz@gmail.com> wrote in message
news:1172964366.360317.54750@30g2000cwc.googlegroups.com...
> On Mar 3, 6:32 am, "Brandon Jasionowski" <killerhe...@gmail.com>
> wrote:
>> On Mar 3, 12:55 am, kaosnan...@gmail.com wrote:
>>
>> > I am using these programs in my digital class but do not know how to
>> > link modelsim to ISE. In our school lab, after I make my schematic, I
>> > can run model sim to simulate it from inside ISE. Does someone know
>> > how I would set this up?
>>
>> Open up ISE.
>>
>> Edit > Preferences > ISE General > Integrated Tools
>>
>> Browse to modelsim.exe.
>>
>> If you change the Sources pulldown to Behavioral Simulation in your
>> project, you can select a test-bench, right-click > properties on the
>> ModelSim icon to change some properties.
>
> The ModelSim icom is not available.
>
Reply by ●March 3, 20072007-03-03
On Mar 3, 6:32 am, "Brandon Jasionowski" <killerhe...@gmail.com>
wrote:
> On Mar 3, 12:55 am, kaosnan...@gmail.com wrote:
>
> > I am using these programs in my digital class but do not know how to
> > link modelsim to ISE. In our school lab, after I make my schematic, I
> > can run model sim to simulate it from inside ISE. Does someone know
> > how I would set this up?
>
> Open up ISE.
>
> Edit > Preferences > ISE General > Integrated Tools
>
> Browse to modelsim.exe.
>
> If you change the Sources pulldown to Behavioral Simulation in your
> project, you can select a test-bench, right-click > properties on the
> ModelSim icon to change some properties.
The ModelSim icom is not available.
Reply by Brandon Jasionowski●March 3, 20072007-03-03
On Mar 3, 12:55 am, kaosnan...@gmail.com wrote:
> I am using these programs in my digital class but do not know how to
> link modelsim to ISE. In our school lab, after I make my schematic, I
> can run model sim to simulate it from inside ISE. Does someone know
> how I would set this up?
Open up ISE.
Edit > Preferences > ISE General > Integrated Tools
Browse to modelsim.exe.
If you change the Sources pulldown to Behavioral Simulation in your
project, you can select a test-bench, right-click > properties on the
ModelSim icon to change some properties.
Reply by ●March 3, 20072007-03-03
I am using these programs in my digital class but do not know how to
link modelsim to ISE. In our school lab, after I make my schematic, I
can run model sim to simulate it from inside ISE. Does someone know
how I would set this up?