Hello,
I have no experience with make files. Can you tell me which software I
have to use and how to run the make file?
thanks and best regards,
Karel
Reply by GMM50●April 3, 20072007-04-03
> I guess that I will have to change boot_loader_epcs_bits.S for that.
> My first problem is to assemble these files. Has anybody done this
> before. How should I do use the MakeFile?
I did just that to verify the object files I was linking in were
correct. And they were.
I created a separate directory with the loader source. I used the
make file that is located in the Altera boot loader directory.
gm
Reply by Dolphin●April 3, 20072007-04-03
Hello,
I want to recompile the bootloader for the Nios processor. The reason
that I want to do this is:
- I use an EPCS flash
- by default Nios code is situated directly after the FPGA bitstream
- I want the Nios code to be in a different sector as the FPGA
bitstream
I guess that I will have to change boot_loader_epcs_bits.S for that.
My first problem is to assemble these files. Has anybody done this
before. How should I do use the MakeFile?
thanks and best regards,
Karel