Now it is working. I just remove some; and space in the PATH
enviroment and then it works.
Thank you,
Rebecca
Reply by Rebecca●April 26, 20072007-04-26
> Click up a shell, bash or cmd.exe
>
> mkdir play
> cd play
> vcom
>
> If this doesn't give you the vcom usage,
> type "exit" to close the shell,
> find vcom, and add it's location
> to your path and try again.
>
> -- Mike Treseler
You are right. I can't find vcom usage. But I do added the location of
modelsim and XPS to the PATH. Neither of them work. Probably something
wrong with my windows setting.
Thanks,
Rebecca
Reply by Mike Treseler●April 25, 20072007-04-25
Rebecca wrote:
> When I complie the simulation library in EDK 9.1.01i using the library
> compilation wizard, it told me that "modlesim is not found! please
> ensure that the simulator is correctly installed and/or the necessary
> envoroment settings are available".
Click up a shell, bash or cmd.exe
mkdir play
cd play
vcom
If this doesn't give you the vcom usage,
type "exit" to close the shell,
find vcom, and add it's location
to your path and try again.
-- Mike Treseler
Reply by Rebecca●April 25, 20072007-04-25
Hi, All:
When I complie the simulation library in EDK 9.1.01i using the library
compilation wizard, it told me that "modlesim is not found! please
ensure that the simulator is correctly installed and/or the necessary
envoroment settings are available". But I do have modelsim se 6.2e and
6.1e intalled on my machine and they work fine. The only system
variable I set for modelsim is LM_LICENSE_FILE, should I set any other
variables?
And EDK says it only support Modelsim SE/PE 6.1e. I am wondering can't
it support the later versions? But anyway, I intalled 6.1e and got the
same result.
By the way, the wizard didn't work when I used EDK 8.2 and I had to do
it manually? Am I wrong somewhere?
Thanks a lot,
Rebecca