"Weng Tianxiang" <wtxwtx@gmail.com> wrote in message
news:1179775771.504358.102620@y18g2000prd.googlegroups.com...
> Hi,
> When my ModelSim version is upgraded from 6.1c to 6.2c, a new problem
> happens:
>
> When opening wave.do file, either created by 6.1c version or 6.2c
> version, the following error information would appear:
>
> # WLF Error: Bad initial WLF parcel. WLF file is corrupt.
> # Cannot open file: C:/Weng/Simulation/CITO2/wave.do
>
> It means I cannot normally use 6.2c version of ModelSim, because
> complex waveform waveforms patters can be saved, but it cannot be
> reopened.
>
> Is there a way to resolve the problem?
Try 6.3?,
pass the wlf to Mentor and ask them to look into it and provide a
workaround,
or convert the 6.1c WLF to VCD (wlf2vcd) and back to WLF (vcd2wlf) in 6.2c,
Hans
www.ht-lab.com
>
> Thank you.
>
> Weng
>
Reply by Weng Tianxiang●May 21, 20072007-05-21
Hi,
When my ModelSim version is upgraded from 6.1c to 6.2c, a new problem
happens:
When opening wave.do file, either created by 6.1c version or 6.2c
version, the following error information would appear:
# WLF Error: Bad initial WLF parcel. WLF file is corrupt.
# Cannot open file: C:/Weng/Simulation/CITO2/wave.do
It means I cannot normally use 6.2c version of ModelSim, because
complex waveform waveforms patters can be saved, but it cannot be
reopened.
Is there a way to resolve the problem?
Thank you.
Weng