jon@beniston.com (Jon Beniston) wrote in message news:<e87b9ce8.0402190800.2f11b513@posting.google.com>...
> "Kenneth Land" <kland1@neuralog1.com1> wrote in message news:<1038fig29qmvb27@news.supernews.com>...
> > Check again.  I'm downloading a version 3.1 that has todays date on it.
> 
> Bizzare. Perhaps they were in the process of updating it when I
> looked. I've now got it, but it fails to build GCC on either Linux or
> CygWin:
> 
> ./genattr ../../src/gcc/config/nios/nios.md > tmp-attr.h
> './../src/gcc/config/nios/nios.md:211: unknown rtx code `define_split
> ../../src/gcc/config/nios/nios.md:211: following context is `  [(set
> (match_operand:SI 0 "general_operand" "")'
> 
> Did it work for you?

Ah! You need to strip the \r's from nios.md!

Cheers,
JonB

Didn't work here, but I didn't try very hard.  We used to use gcc in the
early '90's and so I used to rebuild it on Solaris alot back then, but not
since.

From looking through the gnuprotools distribution, all I see is code for the
stdlibs - no gdb or insight or anything too interesting.  Do you see more?

I'm not interested enough to put anymore into it.  It does what I need as
is.

:)
Ken


"Jon Beniston" <jon@beniston.com> wrote in message
news:e87b9ce8.0402190800.2f11b513@posting.google.com...
> "Kenneth Land" <kland1@neuralog1.com1> wrote in message
news:<1038fig29qmvb27@news.supernews.com>...
> > Check again.  I'm downloading a version 3.1 that has todays date on it.
>
> Bizzare. Perhaps they were in the process of updating it when I
> looked. I've now got it, but it fails to build GCC on either Linux or
> CygWin:
>
> ./genattr ../../src/gcc/config/nios/nios.md > tmp-attr.h
> './../src/gcc/config/nios/nios.md:211: unknown rtx code `define_split
> ../../src/gcc/config/nios/nios.md:211: following context is `  [(set
> (match_operand:SI 0 "general_operand" "")'
>
> Did it work for you?
>
> Cheers,
> JonB

"Kenneth Land" <kland1@neuralog1.com1> wrote in message news:<1038fig29qmvb27@news.supernews.com>...
> Check again.  I'm downloading a version 3.1 that has todays date on it.

Bizzare. Perhaps they were in the process of updating it when I
looked. I've now got it, but it fails to build GCC on either Linux or
CygWin:

./genattr ../../src/gcc/config/nios/nios.md > tmp-attr.h
'./../src/gcc/config/nios/nios.md:211: unknown rtx code `define_split
../../src/gcc/config/nios/nios.md:211: following context is `  [(set
(match_operand:SI 0 "general_operand" "")'

Did it work for you?

Cheers,
JonB

jon@beniston.com (Jon Beniston) wrote in message news:<e87b9ce8.0402181220.29d3bf08@posting.google.com>...
> Does anyone know where I can download the source to the NIOS GNU
> toolchain? Altera's web site gives some instructions:
> 
> http://www.altera.com/support/kdb/rd11272000_7307.html
> 
> But when logging in to the FTP site, I can only see empty directories.
> Any suggestions?
> 

Also, does anyone know of a document that details all of the
instruction timings / latencies for NIOS?

Cheers,
JonB

Check again.  I'm downloading a version 3.1 that has todays date on it.

I've downloaded previous versions, but never done much with them.  It would
be nice to add a little feature here or there.  (like jumping to the source
position from Insight to Visual Studio)

Not sure if its worth it though with rumors of an improved IDE with Nios II.

Ken

"Jon Beniston" <jon@beniston.com> wrote in message
news:e87b9ce8.0402181220.29d3bf08@posting.google.com...
> Does anyone know where I can download the source to the NIOS GNU
> toolchain? Altera's web site gives some instructions:
>
> http://www.altera.com/support/kdb/rd11272000_7307.html
>
> But when logging in to the FTP site, I can only see empty directories.
> Any suggestions?
>
> Cheers,
> JonB

Does anyone know where I can download the source to the NIOS GNU
toolchain? Altera's web site gives some instructions:

http://www.altera.com/support/kdb/rd11272000_7307.html

But when logging in to the FTP site, I can only see empty directories.
Any suggestions?

Cheers,
JonB