On Feb 1, 5:45=A0pm, john_griessen <j...@foseda.com> wrote:
> On Jan 31, 1:39=A0pm, Antti <Antti.Luk...@googlemail.com> wrote:
>
> > On Jan 31, 8:53=A0pm, Antti <Antti.Luk...@googlemail.com> wrote:
> > the problem seems to be that the minimum number of APB slaves is 2 !
>
> What is it like using LIbero with CoreABC? =A0Do they offer small low
> cost packages?
>
> John Griessen
Hi
I am writing User manual (reference designs section!) for the FPGA-
Stamp
http://trioflex.com/index.php?option=3Dcom_content&task=3Dview&id=3D22&Item=
id=3D26
i am surprised how nice the Libero has become, the smart design is
really nice thing for quick wiring
one example that i made, CoreABC+CorePWM with small program that set
the LED PWM intensity
and loops and changes it, that takes
249 logic cells, with code implemented as hard rom in logic
sure it only 5 instructions and most of the stuff is optimized away
still the CoreABC is pretty much useable similarly to PicoBlaze
Antti
Reply by john_griessen●February 1, 20092009-02-01
On Jan 31, 1:39=A0pm, Antti <Antti.Luk...@googlemail.com> wrote:
> On Jan 31, 8:53=A0pm, Antti <Antti.Luk...@googlemail.com> wrote:
> the problem seems to be that the minimum number of APB slaves is 2 !
What is it like using LIbero with CoreABC? Do they offer small low
cost packages?
John Griessen
Reply by Antti●January 31, 20092009-01-31
On Jan 31, 8:53=A0pm, Antti <Antti.Luk...@googlemail.com> wrote:
>
> it seems that CoreABC can be used in Libero,
> but when trying to add a CoreABC instance it asks for CoreConsole to
> be installed and configured.
> and if that is done, then it will forget some of the connections made
> and if that project is closed and reopened then it says that in need
> to upgrade coreconsole design
> to new smart design flow, but then it says that the conversion is not
> supported for CoreABC
>
> CoreABC should be simple as A B C!
> But all attempts to use it with lates Libero version seem to fail
>
> Antti
issue solved.
the stupid user always tries the one combination first that doesnt
work.
the problem seems to be that the minimum number of APB slaves is 2 !
trying to build a system with only one APB peripheral leads to
different errors..
Antti has solved his own problem
Reply by Antti●January 31, 20092009-01-31
Hi
according to the screenshot here
http://www.actel.com/products/software/smartdesign/default.aspx
it seems that CoreABC can be used in Libero,
but when trying to add a CoreABC instance it asks for CoreConsole to
be installed and configured.
and if that is done, then it will forget some of the connections made
and if that project is closed and reopened then it says that in need
to upgrade coreconsole design
to new smart design flow, but then it says that the conversion is not
supported for CoreABC
CoreABC should be simple as A B C!
But all attempts to use it with lates Libero version seem to fail
Antti