ISE10.1 ISE11.х
"libfontconfig" mast be compile with "libexpat" (as in RH, Centos and so on), but not with "libxml2".
take|compile libfontconfig with libexpat (take from CentOS) and copy in ~/lib.
In ISE/settings64.sh(settings32.sh) rewrite
LD_LIBRARY_PATH=${XILINX}/lib/${PLATFORM}:${LD_LIBRARY_PATH}
with
LD_LIBRARY_PATH=<your place with new "libexpat">:${XILINX}/lib/${PLATFORM}:${LD_LIBRARY_PATH}
---
frmsrcurl: http://compgroups.net/comp.arch.fpga/Xilinx-XPS-crash-on-Linux
Reply by Alan Fitch●February 25, 20102010-02-25
On 25/02/10 13:53, pes wrote:
> Hi,
>
> I want to test Microblaze processor with Xilinx tools.
>
> After creating a MicroBlaze project with the Xilinx Platform Studio, the
> application crashes. Same crash happens when I open this project.
>
> I use Mandriva 2010 32b and Xilinx support doesn' t help me since I have
> an unsupported OS.
>
> I get this message with $dmesg after the crash :
>
> xpsgui[21688]: segfault at 5 ip b60a2f38 sp bfbb7b60 error 4 in
> libxml2.so.2.7.6[b6033000+135000]
>
> Any help would be much appreciated.
>
> Thank you
Plan A.
Install a supported OS inside a virtual machine (e.g. VMWare)
Plan B.
Find out the correct version of libxml2.so from a supported OS.
Get hold of a copy.
Put it in a directory.
Modify the Xilinx launch script to fiddle with LD_LIBRARY_PATH so your
"special place" is prepended.
No guarantees though...
regards
Alan
--
Alan Fitch
Reply by pes●February 25, 20102010-02-25
Hi,
I want to test Microblaze processor with Xilinx tools.
After creating a MicroBlaze project with the Xilinx Platform Studio, the
application crashes. Same crash happens when I open this project.
I use Mandriva 2010 32b and Xilinx support doesn' t help me since I have
an unsupported OS.
I get this message with $dmesg after the crash :
xpsgui[21688]: segfault at 5 ip b60a2f38 sp bfbb7b60 error 4 in
libxml2.so.2.7.6[b6033000+135000]
Any help would be much appreciated.
Thank you