One more thing.
Xilinx only supports certain Linux distributions, such as RHEL.
I've seen quite a few problems using ISE GUI tools, such as FPGA
Editor, ChipScope analyzer, on Ubuntu, which is not supported.
Thanks,
Evgeni
Reply by OutputLogic●June 21, 20112011-06-21
Hi,
From the ChipScope user guide:
On 32-bit Linux systems, you can invoke the analyzer from the command
line by running:
<XILINX_ISE_INSTALL>/bin/lin/analyzer
On 64-bit Linux systems, you can invoke the analyzer from the command
line by running:
<XILINX_ISE_INSTALL>/bin/lin64/analyzer
where <XILINX_ISE_INSTALL> represents the location where the Xilinx
ISE Design Suite tools are installed.
For example, default ISE installation on 64-bit machine:
/opt/Xilinx/12.4/ISE_DS/ISE/bin/lin64/analyzer
Thanks,
Evgeni
=======================================
http://outputlogic.com
=======================================
Reply by Amy_jing●June 21, 20112011-06-21
Hi,
I want to using ChipScope Pro Analyzer to check my design. I have already
generated the icon and ila cores and connected them with my design. But I
am stumbled with how to open the interface GUI of ChipScope on linux.
Dose it have interface GUI on linux? If it has, what`s the commands to open
it?
---------------------------------------
Posted through http://www.FPGARelated.com