morpheus wrote:> Ray, > Your suggestion makes sense. I had implemented real only multiplier as > my IF is real. > Regarding the output of the envelope detector, I think, due to > truncation at various stages, I have had to drive the ADC, DAC really > high to get some sort of an output. I need to rethink my truncation > strategy at each stage as I am losing tons of dynamic range and this > would be helped if I have a system modeling tool. > Bless the good people at MathWorks. > Thanks for all the comments > -M >You might consider one of the Matlab clones: Octave or I think the other is called Scilab. I don't have experience with either, but from what I understand both will run matlab M files and have pretty good coverage of the matlab function set.
Complex Baseband
Started by ●March 29, 2007
Reply by ●April 3, 20072007-04-03
Reply by ●April 4, 20072007-04-04
On 3 Apr., 15:23, Ray Andraka <r...@andraka.com> wrote:> You might consider one of the Matlab clones: Octave or I think the other > is called Scilab. I don't have experience with either, but from what I > understand both will run matlab M files and have pretty good coverage of > the matlab function set.Scilab is similar to Matlab but not compatible, Octave is said to have very good compatibility to Matlab. Scilab has a good Windows installer, Octave is better used under Linux. Kolja