[actel] resource usage by entity

Hi ,

I am currently designing a FPGA Actel Proasci3 and I would like to
know the ressource usage (ram/flipflop...) for each of module of the
project , in Altera and Xilinx they report this information easily but
I don't find it in Actel Designer (we also use synplify for synthesis
so it shall be fine to use synplify reporting too)

Thank you for your tips!

Alexis

I was looking into exactly this today for something.
By default, it seems to display the slowest few nets for each clock 
domain, and you can set somewhere how many to show. When I tried the GUI 
today I got a list of about 100.

You can right click somewhere and make a user defined "set" and go 
through and select a list of nets that you want to have in that set.. 
and it allows you to filter the search to find nets corresponding to a 
particular module.. you can filter it like *mymodule* to exclude 
everything else. When I did this it showed the delay information, but 
not everything else, I'm still trying to figure out how to get the rest 
(what I really want to know for the moment is minimum clock period).
If/when I figure out the rest, I'll report back. Or maybe somebody else 
already knows this.

Steve



On 08/23/2011 04:18 PM, kclo4 wrote:
> Hi ,
>
> I am currently designing a FPGA Actel Proasci3 and I would like to
> know the ressource usage (ram/flipflop...) for each of module of the
> project , in Altera and Xilinx they report this information easily but
> I don't find it in Actel Designer (we also use synplify for synthesis
> so it shall be fine to use synplify reporting too)
>
> Thank you for your tips!
>
> Alexis

Ahh my bad. Right after I hit "send" I realized you are looking for 
resource usage, not timing information.

Well, synplify creates a file called your-design.srr, have you had a 
look at this file? It can end up being quite large, but maybe the info 
is there.

On 08/23/2011 09:07 PM, Steve B wrote:
> I was looking into exactly this today for something.
> By default, it seems to display the slowest few nets for each clock
> domain, and you can set somewhere how many to show. When I tried the GUI
> today I got a list of about 100.
>
> You can right click somewhere and make a user defined "set" and go
> through and select a list of nets that you want to have in that set..
> and it allows you to filter the search to find nets corresponding to a
> particular module.. you can filter it like *mymodule* to exclude
> everything else. When I did this it showed the delay information, but
> not everything else, I'm still trying to figure out how to get the rest
> (what I really want to know for the moment is minimum clock period).
> If/when I figure out the rest, I'll report back. Or maybe somebody else
> already knows this.
>
> Steve
>
>
>
> On 08/23/2011 04:18 PM, kclo4 wrote:
>> Hi ,
>>
>> I am currently designing a FPGA Actel Proasci3 and I would like to
>> know the ressource usage (ram/flipflop...) for each of module of the
>> project , in Altera and Xilinx they report this information easily but
>> I don't find it in Actel Designer (we also use synplify for synthesis
>> so it shall be fine to use synplify reporting too)
>>
>> Thank you for your tips!
>>
>> Alexis
>