MyHDL FPGA Tutorial II cont. (Echo, Audio Interface)
IntroductionTo demonstrate the echo on an FPGA board an interface to an audio ADC/DAC chip will be used. The following will explain the connection to the audio codec and the HDL module used to interface.
Audio Codec InterfaceI have two boards with TI AIC23b audio codecs. The AIC23 has a configuration interface (ability to program the registers) and a streaming audio interface. The SPI mode will be used to configure the codec and the I2S interface is used to send and...
An Editor for HDLs
Unless you're still living in the '90s and using schematics, your FPGA designs are entered into text files as VHDL or Verilog source. Which, of course, implies you're using some form of text editor. Now, right after brace placement in C, the choice of an editor is the topic most likely to incite a nerd civil war (it's a bike-shed issue). I won't attempt to influence your choice because it really makes no difference to me. But if you are using the same editor I do, then maybe I can help you...
Designing a FPGA Micro Pt2 - Clock and Counter build and test.
So last time I looked and talked about designing my own PIC12F509. I concluded by talking shortly about the clock that is used inside the chip. If you have not read this it may be a good time to jump back and read what I have written so far. I’ll be putting links back at the top of every blog from now on to help.State Machine ‘v’ Micro in a FPGADesigning a FPGA Micro Pt1 - Start The ClockOk so this last week I started writing the VHDL code for my PIC core that I’ll be...
Designing a FPGA Micro Pt1 - Start The Clock
Last time I talked about state machines and micro’s inside FPGAs and why you may want to consider having a micro. So lets say you have decided you want or need a micro in your FPGA design. Where will you start? Well there are lots to pick from but one option is to design your own. So with that in mind I decided to set myself the challenge of doing just that.
Developing FPGA-DSP IP with Python
This blog post was previously titled MyHDL ASIC Proven (How is this related to FPGAs?) but the blog post has been updated and mainly discusses developing FPGA-DSP IP with Python / MyHDL. The original content is still present but the post has been reorganized and expanded. Original post 16-Mar-2010.
Developing FPGA-DSP IP with Python / MyHDLUsing Python to develop DSP logic for an FPGA is very powerful. The Python ecosystem contains many packages including numerical and...
Developing FPGA-DSP IP with Python
This blog post was previously titled MyHDL ASIC Proven (How is this related to FPGAs?) but the blog post has been updated and mainly discusses developing FPGA-DSP IP with Python / MyHDL. The original content is still present but the post has been reorganized and expanded. Original post 16-Mar-2010.
Developing FPGA-DSP IP with Python / MyHDLUsing Python to develop DSP logic for an FPGA is very powerful. The Python ecosystem contains many packages including numerical and...
MyHDL FPGA Tutorial II cont. (Echo, Audio Interface)
IntroductionTo demonstrate the echo on an FPGA board an interface to an audio ADC/DAC chip will be used. The following will explain the connection to the audio codec and the HDL module used to interface.
Audio Codec InterfaceI have two boards with TI AIC23b audio codecs. The AIC23 has a configuration interface (ability to program the registers) and a streaming audio interface. The SPI mode will be used to configure the codec and the I2S interface is used to send and...
Designing a FPGA Micro Pt2 - Clock and Counter build and test.
So last time I looked and talked about designing my own PIC12F509. I concluded by talking shortly about the clock that is used inside the chip. If you have not read this it may be a good time to jump back and read what I have written so far. I’ll be putting links back at the top of every blog from now on to help.State Machine ‘v’ Micro in a FPGADesigning a FPGA Micro Pt1 - Start The ClockOk so this last week I started writing the VHDL code for my PIC core that I’ll be...
Designing a FPGA Micro Pt1 - Start The Clock
Last time I talked about state machines and micro’s inside FPGAs and why you may want to consider having a micro. So lets say you have decided you want or need a micro in your FPGA design. Where will you start? Well there are lots to pick from but one option is to design your own. So with that in mind I decided to set myself the challenge of doing just that.
MyHDL Interface Example
MyHDL Interfaces ExampleWith the next release of MyHDL, version 0.9, conversion of interfaces will be supported. In this context an interface is any object with a Signal attribute. This can be used to simplify connection between modules and port definitions. For example, if I want to define a simple memory-map bus, the Signals for the bus can be defined as follows:
class BareBoneBus: def __init__(self): self.wr = Signal(False) self.rd =...MyHDL FPGA Tutorial II cont. (Echo, Audio Interface)
IntroductionTo demonstrate the echo on an FPGA board an interface to an audio ADC/DAC chip will be used. The following will explain the connection to the audio codec and the HDL module used to interface.
Audio Codec InterfaceI have two boards with TI AIC23b audio codecs. The AIC23 has a configuration interface (ability to program the registers) and a streaming audio interface. The SPI mode will be used to configure the codec and the I2S interface is used to send and...
Fit Sixteen (or more) Asynchronous Serial Receivers into the Area of a Standard UART Receiver
IntroductionThis article will describe a technique, available in many current FPGA architectures, to fit a large amount of logic into a small area. About ten years ago now (Feb/Mar 2005), I helped develop a multi-line Caller ID product. The Multi-Channel Asynchronous Receiver (MCAR) FPGA core developed for that product will be used to illustrate the technique(s) needed to fit a 16 channel MCAR into a single Spartan II XC2S30-5VQ100 FPGA.
To stay true to the original design, I...
MyHDL Interface Example
MyHDL Interfaces ExampleWith the next release of MyHDL, version 0.9, conversion of interfaces will be supported. In this context an interface is any object with a Signal attribute. This can be used to simplify connection between modules and port definitions. For example, if I want to define a simple memory-map bus, the Signals for the bus can be defined as follows:
class BareBoneBus: def __init__(self): self.wr = Signal(False) self.rd =...Designing a FPGA Micro Pt1 - Start The Clock
Last time I talked about state machines and micro’s inside FPGAs and why you may want to consider having a micro. So lets say you have decided you want or need a micro in your FPGA design. Where will you start? Well there are lots to pick from but one option is to design your own. So with that in mind I decided to set myself the challenge of doing just that.
Designing a FPGA Micro Pt2 - Clock and Counter build and test.
So last time I looked and talked about designing my own PIC12F509. I concluded by talking shortly about the clock that is used inside the chip. If you have not read this it may be a good time to jump back and read what I have written so far. I’ll be putting links back at the top of every blog from now on to help.State Machine ‘v’ Micro in a FPGADesigning a FPGA Micro Pt1 - Start The ClockOk so this last week I started writing the VHDL code for my PIC core that I’ll be...