Designing a FPGA Micro Pt1 - Start The Clock

Paul J Clarke May 22, 2012

Last time I talked about state machines and micro’s inside FPGAs and why you may want to consider having a micro. So lets say you have decided you want or need a micro in your FPGA design. Where will you start? Well there are lots to pick from but one option is to design your own. So with that in mind I decided to set myself the challenge of doing just that.

 


Grandiose Delusions

Christopher Felton May 3, 2012

Recently on the MyHDL mailing-list there have been discussions about some other immature Python/HDL tools.  In these discussion it was mentioned, how over the years, there has not been a strong set of open-source IP developed using MyHDL.  For those that might be unfamiliar with the term IP (intellectual property) it is a term widely used in digital hardware to refer to reusable hardware components or blocks.

Many design languages have relied on that first big...


State Machine ‘v’ Micro in a FPGA

Paul J Clarke April 23, 2012

Designing a system and considering if to have a FPGA in the first place is something a engineer should always consider. However one thing that people look to do is designing a microcontroller on a FPGA and in this post I want to consider why we would do it at all and what would be the real consideration for doing this.

We first look at what's available in the microcontroller world. We have a vast range from tiny 8bit 6 pin devices right the way up to monster 32bit devices. These...


My VHDL <= monpjc; Journey

Paul J Clarke March 18, 20121 comment

I always like to start my first blog on a website with a bit of a introduction as to who I am and what I’ll be writting about. I feel this gives you the reader a opportunity to see where I’m coming from and understand a little of my point of view. So when I was asked to come and start blogging on FPGARelated I wondered what I should say. So for my first blog its all about how me, aka monpjc, and how I got into VHDL.

It started a long time ago when I was working for a...


MyHDL FPGA Tutorial I (LED Strobe)

Christopher Felton January 31, 20126 comments

Last updated 05-Nov-2015

Introduction

From many perspectives the latest FPGA offerings from 'X' and 'A' are large devices - mucho programmable logic resources.  Even the devices that one can get for sub \$10 are relatively large.  Because of the size of these FPGAs they are implemented using an HDL.  To manually configure each circuit would be a long and tedious task.  It is not feasible to program an FPGA by manually defining the logic for each LUT and manually...


FPGA or DSP Processor - Parameters to Make the Right Choice

Muhammad Yasir December 28, 20112 comments

Introduction

Digital Signal Processing (DSP) has a huge global market that is growing fast day by day with rapidly evolving sophisticated modern electronics applications like 3G wireless, voice over internet protocol (VoIP), multimedia systems, radar and satellite systems, medical systems, image-processing applications and consumer electronics. These sophisticated DSP applications pose many conflicting challenges to system designers and application developers in terms of cost and...


Introduction to FPGA Technology

Muhammad Yasir May 12, 2011
Overview

FPGA stands for Field Programmable Gate Array. An FPGA is an integrated circuit (IC) that can be programmed and configured by the embedded system developer in the field after it has been manufactured. FPGA is a semi-conductor device which is not limited to any pre-defined hardware function; it is rather highly flexible in its functionality and may be configured by the embedded system developer according to his design requirements. FPGAs use pre-built logic blocks and programmable...


USB-FPGA : Introduction

Christopher Felton January 12, 20111 comment

This blog is an introduction to a series of blogs I hope to write.  The blogs will cover the design and experiences I had on a project that spanned the last 6 years.  The project was the development of an USB FPGA board and the supporting gateware, firmware, and software.  The project has had different levels of activity over the years, ranging from none to some, but it has been an ongoing project, albeit, during sleepless nights.  Lately, I have ported the HDL (gateware)...


Polynomial Inverse

Mike November 23, 20152 comments

One of the important steps of computing point addition over elliptic curves is a division of two polynomials.  When working in $GF(2^n)$ we don't have large enough powers to actually do a division, so we compute the inverse of the denominator and then multiply.  This is usually done using Euclid's method, but if squaring and multiplying are fast we can take advantage of these operations and compute the multiplicative inverse in just a few steps.

The first time I ran across this...


MyHDL ... MyPWM

Christopher Felton June 3, 20136 comments

The PWM topic appears to be popular lately on the fpgarelated site.  This is coincidence, but I typically find the topic of modulating and demodulating signals interesting.  For digital systems it is always entertaining to play with PWMs.  The following PWM RTL description is quite a bit different than the PWM module described by Anton Babushkin.  The module presented here is a minimal PWM engine defined at design time (i.e. not run-time).  

As...


Designing a FPGA Micro Pt2 - Clock and Counter build and test.

Paul J Clarke June 26, 20121 comment

So last time I looked and talked about designing my own PIC12F509. I concluded by talking shortly about the clock that is used inside the chip. If you have not read this it may be a good time to jump back and read what I have written so far. I’ll be putting links back at the top of every blog from now on to help.State Machine ‘v’ Micro in a FPGADesigning a FPGA Micro Pt1 - Start The ClockOk so this last week I started writing the VHDL code for my PIC core that I’ll be...


Grandiose Delusions

Christopher Felton May 3, 2012

Recently on the MyHDL mailing-list there have been discussions about some other immature Python/HDL tools.  In these discussion it was mentioned, how over the years, there has not been a strong set of open-source IP developed using MyHDL.  For those that might be unfamiliar with the term IP (intellectual property) it is a term widely used in digital hardware to refer to reusable hardware components or blocks.

Many design languages have relied on that first big...


Elliptic Curve Digital Signatures

Mike December 9, 2015

A digital signature is used to prove a message is connected to a specific sender.  The sender can not deny they sent that message once signed, and no one can modify the message and maintain the signature. The message itself is not necessarily secret. Certificates of authenticity, digital cash, and software distribution use digital signatures so recipients can verify they are getting what they paid for.

Since messages can be of any length and mathematical algorithms always use fixed...


Polynomial Math

Mike November 3, 20152 comments

Elliptic Curve Cryptography is used as a public key infrastructure to secure credit cards, phones and communications links. All these devices use either FPGA's or embedded microprocessors to compute the algorithms that make the mathematics work. While the math is not hard, it can be confusing the first time you see it.  This blog is an introduction to the operations of squaring and computing an inverse over a finite field which are used in computing Elliptic Curve arithmetic. ...


Choosing an Implementation Approach

David Days May 10, 2018
What one man can do, another can do!--The Edge (1997) Choose the hill you want to die on.--Common saying attributed to the United States Marine Corps Planning out an FPGA Implementation

In my first article, I gave a high-level view of the project that brings me into the world of FPGA development. At the end, I tried to break down the areas of development that would be involved, and some of the knowledge and expertise I would probably have to gain in order to make it a...


My VHDL <= monpjc; Journey

Paul J Clarke March 18, 20121 comment

I always like to start my first blog on a website with a bit of a introduction as to who I am and what I’ll be writting about. I feel this gives you the reader a opportunity to see where I’m coming from and understand a little of my point of view. So when I was asked to come and start blogging on FPGARelated I wondered what I should say. So for my first blog its all about how me, aka monpjc, and how I got into VHDL.

It started a long time ago when I was working for a...